3M™ Under Sink Water Filter System, 3MFF100, 5616318, Full Flow, 0.2 μm, 6/CS
- 3M ID 7000125866
Details
Highlights
- Cleaner water: Reduces particulate, chlorine taste and odor, lead, parasitic protozoan cysts and select volatile organic compounds (VOCs) such as benzene and p-Dichlorobenzene
- Full flow: Designed to flow at the rate of your faucet, up to 2.5 gallons per minute, minimizing water pressure loss commonly seen with using water filters
- Easy to install: Easier to install than dedicated faucet under counter drinking water systems because it connects to your existing faucet and does not require a separate faucet or any holes to be drilled into your countertop
- Sanitary Quick Change (SQC): Design allows for fast and easy change-outs of the 3M™ Aqua-Pure™ Under Sink Full Flow Replacement Water Filter 3MFF101 without the need for a filter wrench or contact with the filter media and filter life up to 12 months
- Built-in shut-off: Head assembly includes a built-in shut-off valve that allows for changing the SQC filters without shutting off the water supply
- Carbon-block filtration: Advanced triple stage filtration process to help provide cleaner, clearer, better tasting drinking water
- NSF Standard 42 and 53 certified: Tested by one of the world’s most respected independent certification organizations that helps protect the world’s food, water, consumer products and environment
- Includes a filter-head assembly, filter and mounting screws. Installation requires some household tools and additional plumbing components
The 3M™ Aqua-Pure™ Under Sink Full Flow Water Filter System 3MFF100 is a drinking water filtration system that can be installed on your existing primary faucet to provide filtered water at a high flow rate. It reduces particulates, chlorine taste and odor, parasitic protozoan cysts, lead and select volatile organic compounds (VOCs) such as benzene and p-Dichlorobenzene.
3M™ Aqua-Pure™ Under Sink Full Flow Water Filter System 3MFF100
3M™ Aqua-Pure™ Under Sink Full Flow Water Filter System 3MFF100 is 3M’s state-of-the-art drinking water filtration system with a capacity of up to 6,000 gallons. This system installs under the sink and provides on-demand water filtration for drinking (water, coffee, tea) and cooking purposes. It is NSF-certified to reduce particulate, chlorine taste and odor, parasitic protozoan cysts, lead and select volatile organic compounds (VOCs) such as benzene and pDichlorobenzene. The universal system design allows for use on both chlorinated (municipal) and non-chlorinated (well water) systems. A key feature of this water filter is that it is designed to flow at the rate of your faucet (up to 2.5 gallons per minute), minimizing loss of water pressure commonly seen with using water filters. The advanced triple stage filtration process helps provide cleaner, clearer, better tasting drinking water. The first stage nonwoven media captures the larger particles. During the second stage, the pleated sub-micron membrane reduces particles as small as 0.2 micron. In the third and final stage, the carbon block reduces chlorine taste and odor and select VOCs that may be present in the drinking water. Filter change-outs take a few minutes with the easy Sanitary Quick Change (SQC) design. This design allows for fast and easy cartridge change-outs without having to contact the filter media or the need for a filter wrench.
-
The science inside matters.
The 3MFF100 might look like an ordinary filter on the outside, but inside it’s anything but ordinary. Its three-stage filtration system with carbon block technology provides filtration you can count on to help reduce contaminants that may be in your drinking water. Each product comes with a performance data sheet that shows the list of contaminants that the filter has been shown to reduce and certified by a third-party NSF.
Installation
The 3M™ Aqua-Pure™ Under Sink Full Flow Water Filter System 3MFF100 includes a replacement filter cartridge, head assembly, attached mounting bracket and mounting screws. The head assembly includes a built-in shut-off valve that allows for changing the Sanitary Quick Change filters without shutting off the water supply. For easy installation, a separate kit including tubing and common fittings is sold separately. To maximize system performance and efficiency, regularly scheduled maintenance including replacement of the filter cartridges at the required interval, at the rated capacity or sooner if a reduction in water flow occurs, is required. The filter life is dependent on actual use and incoming water quality.
For informational purposes only. Please refer to the system manual for complete installation and use instructions. It is recommended this system be installed by a qualified professional or someone familiar with DIY plumbing projects.
-
Steps 1-2: Turn off cold water supply. Open faucet to relieve pressure. -
Steps 3-4: Fasten filter head wall fasteners. Measure and cut the tubing for the filter head assembly connections. -
Steps 5-7: Install faucet adapter to faucet stem. Connect to cold water supply. Inspect the O-rings. -
Steps 8-10: Install the filter cartridge. Turn on the water. Flush the system.
Suggested applications
- Drinking water sink faucets in homes, offices, and schools
- Drinking water fountains in offices and schools
Specifications
